Cluster Jobs: Difference between revisions

From genomewiki
Jump to navigationJump to search
No edit summary
(standard wiki markup for section headings for automatic contents construction)
Line 1: Line 1:
==Cluster Job Organization==
==Batch Location==
 
<h4>Batch Location</h4>
Don't run your batches from your home directory.  A runaway
Don't run your batches from your home directory.  A runaway
kluster job can quickly swamp the NFS server for the home directories
kluster job can quickly swamp the NFS server for the home directories
Line 9: Line 7:
to use local disk to reduce I/O congestion.  
to use local disk to reduce I/O congestion.  


<h4>Input/Output</h4>
==Input/Output==
The most critical factor in designing your cluster jobs is to
The most critical factor in designing your cluster jobs is to
completely understand where your input data is coming from,
completely understand where your input data is coming from,
Line 22: Line 20:
<B>Important note:</B>  Remember to clean up any temporary files you create on /scratch/tmp
<B>Important note:</B>  Remember to clean up any temporary files you create on /scratch/tmp


<h4>Job Script</h4>
==Job Script==
A properly constructed job is typically a small .csh shell script that begins:
A properly constructed job is typically a small .csh shell script that begins:
<pre>
<pre>
Line 59: Line 57:
than 100 cpus to a batch containing long-running jobs.  If the cluster is busy please be receptive to requests to reduce the number of CPUs your long running jobs take even if you've already limited them to 100.
than 100 cpus to a batch containing long-running jobs.  If the cluster is busy please be receptive to requests to reduce the number of CPUs your long running jobs take even if you've already limited them to 100.


<h4>Job Recovery</h4>
==Job Recovery==
There will almost always be failed jobs for a variety of reasons.  The most important thing to do is design your jobs such that they have an atomic file presence indicator of successful completion.  The case is typically to make a job do all of its work on the /scratch/tmp/ filesystem, creating its result file there.  When it has successfully completed its work there, it does a single mv of the result file back to a /hive/ filesystem, which is outside of the cluster and thus more permanent. The existence of that file result can be verified by parasol commands to determine if the job was successfully completed.  Parasol keeps track of the jobs that are successful or not.  To re-run the failed jobs, you merely do a 'para push' of the batch again, and the failed jobs will be retried. A job can be retried like this until it fails four times.  A gensub2 template example to check a result file:<pre>
There will almost always be failed jobs for a variety of reasons.  The most important thing to do is design your jobs such that they have an atomic file presence indicator of successful completion.  The case is typically to make a job do all of its work on the /scratch/tmp/ filesystem, creating its result file there.  When it has successfully completed its work there, it does a single mv of the result file back to a /hive/ filesystem, which is outside of the cluster and thus more permanent. The existence of that file result can be verified by parasol commands to determine if the job was successfully completed.  Parasol keeps track of the jobs that are successful or not.  To re-run the failed jobs, you merely do a 'para push' of the batch again, and the failed jobs will be retried. A job can be retried like this until it fails four times.  A gensub2 template example to check a result file:<pre>
{check out line+ &lt;result.file&gt;}</pre>
{check out line+ &lt;result.file&gt;}</pre>
Line 74: Line 72:
"line+" means file is 1 or more lines of data and is properly line-feed terminated
"line+" means file is 1 or more lines of data and is properly line-feed terminated


<h4>Sick nodes</h4>
==Sick nodes==
Sometimes a kluster node will become defective during the running of your batch.  Parasol will stop assigning jobs to that defective node.  You can see this with para showSickNodes.  To reset the sick-status on your batch run para clearSickNodes.
Sometimes a kluster node will become defective during the running of your batch.  Parasol will stop assigning jobs to that defective node.  You can see this with para showSickNodes.  To reset the sick-status on your batch run para clearSickNodes.


Line 82: Line 80:
this problem and were able to fix the issue, ou can reset the sick status with para clearSickNodes.
this problem and were able to fix the issue, ou can reset the sick status with para clearSickNodes.


<h4>See also:</h4>
==See also:==
<ul>
<ul>
<li> [http://genecats.cse.ucsc.edu/eng/KiloKluster.html Where Is Everything]
<li> [http://genecats.cse.ucsc.edu/eng/KiloKluster.html Where Is Everything]

Revision as of 21:40, 8 October 2015

Batch Location

Don't run your batches from your home directory. A runaway kluster job can quickly swamp the NFS server for the home directories and thereby lock out all users. Your batch is typically run from some /hive directory. Also, please make sure your umask is set to 002 rather than the more restrictive 022. We need to have group write permission to everyone's directory so we can fix stuff when you are not available.

There is an older document that describes the pre-hive filesystems, that contains some helpful information here: file system locations. Note that it may still be helpful to use local disk to reduce I/O congestion.

Input/Output

The most critical factor in designing your cluster jobs is to completely understand where your input data is coming from, where temporary files will be made during processing, and where your output data results are going. With several hundred CPUs reading and writing data, it is trivially simple to make life very difficult for the underlying NFS fileservers. The ideal case is, your input data comes from one file server, your temporary files are written to /scratch/tmp/ local disk space, and your output data goes back to a different NFS server than where your input data came from. For the case of input data that will be used in a variety of cluster jobs over an extended period of time, it can be arranged to copy that data to local /scratch/ disk space on each cluster node.

Important note: Remember to clean up any temporary files you create on /scratch/tmp

Job Script

A properly constructed job is typically a small .csh shell script that begins:

#!/bin/csh -fe

The -fe ensures the script will run to completion successfully or exit with an error if any of the commands fail. Parasol is aware of the errors if a command exits with errors so it will know a job has failed because of that. You can see many script examples in the kent source tree src/hg/makeDb/doc/*.txt files where we document all of our browser construction work.

If a line in your job file is too long it will cause the hub to crash. Each command, along with the header information, needs to fit in 1444 bytes.

If you do want to run bash scripts, include this setting at the top:

set -beEu -o pipefail

to get the script to fail on any command anywhere

Long-Running Jobs and Large Batches

If you really must run jobs that will occupy a lot of CPU time, it is highly recommend instead, to redesign your processing to avoid that. If you insist there is no other way, then you must use the cluster politely. You have to leave the cluster in a state where it can do work for other users. Genome browser work takes priority over other research on the klusters.

Use 'para try' and 'para time' to estimate your average job length and total cluster usage for your batch. Typical job times should be on the order of minutes or less, at the outside tens of minutes. Try to design your processing to stay within this guideline. If you are unable to do this, use the para option -maxJob=N to limit the number of nodes your long-running jobs are going to occupy. For example, hour-long jobs should be limited to 100 nodes. Batches of long-running jobs can easily monopolize the cluster! If there are other people also running long running batches (which you can see with the command "parasol list batches" then please restrict it to 50 nodes.

An exception to this rule is the 'edw' user. This is the ENCODE data warehouse daemon. ENCODE is paying for half of the cluster. Because we have little control over the software the ENCODE consortium chooses to run on the cluster, we can't always break the jobs into smaller pieces. Instead the daemon is set up so that it never even submits jobs that fill up more than half the cluster. Occasionally while debugging other programmers, primarily 'kent' will be running the ENCODE jobs instead of 'edw.' Do not take this as license to monopolize half the cluster yourself, at least not unless you are willing to buy another half cluster for the rest of us.

Check with the group before running a batch that will take longer than two cluster-days, or if your average job time is more than 15 minutes. Also please check with the group before assigning more than 100 cpus to a batch containing long-running jobs. If the cluster is busy please be receptive to requests to reduce the number of CPUs your long running jobs take even if you've already limited them to 100.

Job Recovery

There will almost always be failed jobs for a variety of reasons. The most important thing to do is design your jobs such that they have an atomic file presence indicator of successful completion. The case is typically to make a job do all of its work on the /scratch/tmp/ filesystem, creating its result file there. When it has successfully completed its work there, it does a single mv of the result file back to a /hive/ filesystem, which is outside of the cluster and thus more permanent. The existence of that file result can be verified by parasol commands to determine if the job was successfully completed. Parasol keeps track of the jobs that are successful or not. To re-run the failed jobs, you merely do a 'para push' of the batch again, and the failed jobs will be retried. A job can be retried like this until it fails four times. A gensub2 template example to check a result file:

{check out line+ <result.file>}

is used to tell parasol to check that file to verify job completion, and to make sure the file has at least one line, and ends with a '\n' character.

gensub2 template syntax:

{check 'when' 'what' <file>}

where 'when' is either "in" or "out"
and 'what' is one of: "exists" "exists+" "line" "line+"
"exists" means file exists, may be zero size
"exists+" means file exists and is non-zero size
"line" means file may have 0 or more lines of ascii data and is properly line-feed terminated
"line+" means file is 1 or more lines of data and is properly line-feed terminated

Sick nodes

Sometimes a kluster node will become defective during the running of your batch. Parasol will stop assigning jobs to that defective node. You can see this with para showSickNodes. To reset the sick-status on your batch run para clearSickNodes.

Sick batch

If there are too many failures in a row, the system will consider your batch must be sick rather than the nodes that are failing and it will stop the batch. If you have encountered this problem and were able to fix the issue, ou can reset the sick status with para clearSickNodes.

See also: