New track checklist: Difference between revisions

From genomewiki
Jump to navigationJump to search
(→‎Push to hgwbeta: Added a note about opening existing tracks on beta before staging them.)
Line 8: Line 8:


==Push to hgwbeta==
==Push to hgwbeta==
 
'''Notes on existing tracks:'''
(If this is an update to an to an existing track, you may want to hold off on this step so that you can compare old and new tracks on hgwdev and hgwbeta.)
* If this is an update to an to an existing track, you may want to hold off on this step so that you can compare old and new tracks on hgwdev and hgwbeta.
* Open the track on hgwbeta before staging it to make sure that the update won't cause a cart clash for users currently looking at the track (as evidenced by a completely blank screen, for instance).  If you need to do a cartReset to get the track to show up correctly, something is wrong.


Push all tables from hgwdev to hgwbeta.  There are two ways:
Push all tables from hgwdev to hgwbeta.  There are two ways:

Revision as of 00:40, 23 November 2010

This is the checklist for QA to follow when releasing Genome Browser tracks. General rule: stop testing when you come to the first non-trivial error, and bounce the track to the B queue until the track sponsor fixes it. Friendly advice: There is a script, qaThis.csh, that will do many of the checks for you (and can be and should be expanded to do more)

Background familiarity

If you haven't worked with a track like this one, and it already exists on the RR for another assembly (use 'getAssemblies.csh tablename' on hgwdev to check), use it a bit on the RR to become familar with it. For complex tracks, look for genomewiki pages on it, and/or look through the push queue for previous problems encountered on similar tracks. Familiarize yourself with the tables and files needed for this track.

Push to hgwbeta

Notes on existing tracks:

  • If this is an update to an to an existing track, you may want to hold off on this step so that you can compare old and new tracks on hgwdev and hgwbeta.
  • Open the track on hgwbeta before staging it to make sure that the update won't cause a cart clash for users currently looking at the track (as evidenced by a completely blank screen, for instance). If you need to do a cartReset to get the track to show up correctly, something is wrong.

Push all tables from hgwdev to hgwbeta. There are two ways:

 sudo mypush $db $table mysqlbeta

or, for a list of tables:

 bigPush.csh $db $tableListFile

make beta on hgwbeta in kent/src/hg/makeDb/trackDb like so:

 make beta DBS=$db

Request a push of any listed supporting files in /gbdb from hgwdev to hgnfs1. Note that hgwbeta and the RR share the files on hgnfs1, so once these files are in place, there is not another push required when the track is released to the RR.

Makedoc

Look for an entry for your track in src/hg/makeDb/doc/$db.txt. If there is no mention of this track, make a request to the track sponsor. Basic tracks that are loaded automatically with a new assembly may only have a tiny reference in the makedoc. UCSC Genes has its own document.

Release Log and URL

The "Release Log" field in the push queue should generally contain the shortLabel of the track, or a short description of what is being released if it does not make sense to put a shortLabel here. The entry in this field will be added to the auto-generated release log page. If it makes sense to link to the hgTrackUi page for this track, make an entry in the "Release Log URL" field like so:

 ../../cgi-bin/hgTrackUi?db=[DATABASE]&g=[TRACK]

An actual example:

 ../../cgi-bin/hgTrackUi?db=hg19&g=affyU133

Index

Press "show sizes" in the push queue and check to see that all tables have at least one index key. This is especially important for large tables. There are some tables that do not need an index, such as tables that only have a single line that point to the location of a BAM file.

Note that you can also check indices in MySQL using the command "show index from".

Tables are sorted and internally consistent

Run any of these that apply to your tables:

genePredCheck - Checks that tables in the genePred format are valid. (Tables of this type are usually in the Genes and Gene Prediction group. Usually only the primary table will need this check. Some examples: knownGene, ensGene, refGene.)

pslCheck - Checks that psl tables are valid. (PSL tables show up in nearly any track where alignments are used. Some examples: mrna, est, refSeqAli.)

checkTableCoords - Checks that the genomic coordinates in positional tables are legal (e.g., coordinates are not off the end of a chromosome). If the table passes there will be no output. (Almost every table will need this check, unless it has no chromosome positions in it.)

positionalTblCheck - Checks to see that the a positional table is ordered by chrom and chromStart. A positional table being out of order can cause a huge slowdown in display speed. If the table passes there will be no output. If the table does not pass there will be an error message like:

table hg18.snp129 not sorted starting at row 4867: chr1:387005

Alert the track sponsor if there is an error. He/she may determine that the items are sorted enough to be released. (As long as the items are almost all in order, it will not affect performance.) Also note that Genbank tables are not expected to be in order after updates have run. (Almost every table will need this check.)

joinerCheck

The document kent/src/hg/makeDb/schema/joiner.doc describes what all.joiner is. joinerCheck is the tool that is used to check that the rules in all.joiner are being followed.

Look for your table names in src/hg/makeDb/schema/all.joiner and find the identifiers associated with those tables. Then, for each identifier, run joinerCheck like so:

 joinerCheck -keys -identifier=$identifier -database=$db all.joiner

If there are errors or the table is not mentioned in all.joiner, notify the track sponsor. An entry in the tablesIgnored section of all.joiner is sufficient if there are no table relationships to check.

Be aware of this problem with joinerCheck. Basically, if you get output that looks like this:

 Checking keys on database hg18

that is NOT followed by lines like this:

 anoCar1.blastHg18KG.qName - hits 45332 of 45332 ok

then the rule didn't really run, and you need to remove the -database parameter.

You can also run joinercheck with the -times flag:

 joinerCheck -times -database=$db all.joiner

Look for any errors that are relevant to your track.

The runJoiner.csh script is a shortcut for all of the above, but beware that wildcards in tablesIgnored sections are not recognized, and if the problem above occurs, then you need to run joinerCheck directly.

Chromosome coverage

Some tracks don't have data on all chromosomes. To check which ones do have data (note: script must be run on dev):

 countPerChrom.csh $db $table > resultsFile

Look for chromosomes with no data that should have data. If a "regular" chrom (not random or haplotype) has no data, a note like this should appear in place of the track drop-down:

 [No data-chr21]

This is controlled by the "chromosomes" setting in trackDb.ra. The chromosomes line in trackDb.ra specifies the chromosomes that DO have data. This line is the same as the "restrictList" field in the trackDb table.

Alternatively, there are some easy graphical ways to check chromosome coverage:

  • At the command line, run graph.csh on the resultsFile to see a histogram of the output:
 graph.csh resultsFile

or:

  • Import the table into Genome Graphs.
  • To see a count plus a histogram of chrom coverage, select the table in the Table Browser, hit the "describe table schema" button, and click the "values" link for the chrom field.

FeatureBits and Gaps

Run featureBits, or use the runBits.csh script to run featureBits. runBits.csh checks for coverage and overlap with gap, and also checks for undbridged gaps.

 runBits.csh $db $table

Alert the track sponsor if there are unbridged gaps and this is a track created at UCSC. Put featureBits results in the push queue. If previous assembly also has this track, compare featureBits between current assembly and previous assembly -- if there are big differences between the old and new tracks, alert the track sponsor.

getYield.csh can be used for gene tracks to see how well it captures the footprint of existing tracks, such as refGene or xenoRefGene, e.g.,

 getYield.csh hg19 genscan refGene

output includes:

 yield       = 88.5% (union / refGene)
 enrichment  = 24.1x ((union / genscan) / (refGene / genome))

shows that 88.5% of refGene is present in genscan and that compared to the refGene footprint on the genome, genscan is 24x enriched for refGenes.

Searching

If the track item names are relatively unique, perform a few searches. If search isn't enabled, make that request to the track sponsor. This isn't required for the push. If the track item names are relatively similar (i.e. RNA Genes, TFBS) we don't want to enable search, as it would return too many matches.

The checkHgFindSpec tool with the -checkTermRegex option will check that all of the names in a table that is searched match the regular expression specified in trackDb.ra. It can be run on a single database like this:

 checkHgFindSpec -checkTermRegex $db

There is also a cron job that runs it on all of the active databases on hgwdev and puts the results here (look for your $db.$table combination):

http://genecats.cse.ucsc.edu/qa/test-results/checkHgFindSpec/hgwdevOutput

If checkHgFindSpec gives errors pertinent to your track, request that the track sponsor edit the search entry in trackDb.ra.

Track description

Read the track description and edit for clarity, spelling, and grammar.

Ensure references are in the correct format and in alphabetical order (by first author listed). Ensure quotes, ampersands, and less than and greater than signs are represented with their [html names].

Make sure that any email addresses given on the details page have been through Hiram's sanitizer (encodeEmail.pl). It turns the address into an encrypted HREF "mailto:" address that makes it harder for spammers to use.

All details: 1 data point

Choose a representative data point for the track from the mysql table. Check all details for this data point, including all links. Make sure information from the table is displaying correctly (e.g., if a color is used in the table, make sure that color appears for the item.)

For links that are hard-coded to a particular server, there are some tricks that are used to make them testable on hgwdev and hgwbeta. See the Static_Page_JS_Protocol page for more details.

Protein sequence check (gene annotations only)

Choose a gene that is on the positive strand, exonCount of 1. Check that the protein sequence displayed by the details page matches the sequence displayed by the Base Position track.

Comparison

Compare your track to a similar track if possible. Look to see that the features in your track are more or less in the same position as similar tracks. Look for a lot of items that have a chromStart or chromEnd that is one position different from existing tracks. This could indicate an off-by-one error in the new track. See also discussion of getYield.csh in featureBits section above.

Default Position

Re-evaluate the default position. Does the new track appear as a default? Should it? Location (dbDb.defaultPos) & track priorities (trackDb.ra) should be optimized to make available annotation aesthetically pleasing and scientifically interesting.

Performance and Display

For tracks displayed by default, the full chromosome view (chr1) should display within 20 seconds. For tracks which are not displayed by default, the full chromosome view should display within a minute.

Turn on to full display mode a track that is located physically below your track in the display. Make sure that when your track is in full display mode, that the items in the track below it are still mapping correctly. Sometimes there can be an off-by-one error which is caused by your track. If this is happening, you should not push your track.

Hit the Reverse button and ensure your track displays correctly.

Track Settings (hgTrackUi)

Click on the track name or the mini-button to the left of the track (in hgTracks) to get to the track settings page. Make sure that the track settings work as expected.

Table Descriptions

Hit the "view table schema" button (on hgTrackUi, hgc, or hgTables) and make sure there is a description column present with descriptions of the table fields. If a track has more than one table, be sure to check for table descriptions on each of them. The description column uses the 'tableDescriptions' table to display this information. This table is built nightly on hgwdev and hgwbeta, and must be pushed to the RR if it contains descriptions for a new type of table (things like psl will already be out there).

Background on the tableDescriptions table is here.

Brooke pushes the tableDescriptions tables to the RR once a week.

Label lengths

Check that the shortLabel is 17 characters or less and that the longLabel is 80 characters or less.

Downloads

If there are files associated with the track that are to be pushed to hgdownload, check to see that there is a README that makes sense and the files have an md5sum.txt file that goes with them and is correct. Check the file itself to make sure it is not corrupted and that it contains what is expected. If it is a gzipped file, you can do "zcat file.gz | head" and "zcat file.gz | tail" to look at it. Looking at the last part of the file can sometimes catch corruption that can't be seen by only looking at the first part.

Data files destined for hgdownload are organized on hgwdev at:

/usr/local/apache/htdocs-hgdownload/goldenPath/*

and can be viewed in a browser from http://hgdownload-test.cse.ucsc.edu/downloads.html. Non-data files (such as downloads.html) are in the "hgdownload" git repository. See the Static_Page_Protocol for instructions on checking out that repository. Push requests for downloads should look like something like this:

Please push files from here on hgwdev:
    /usr/local/apache/htdocs-hgdownload/goldenPath/$db/file
To here on hgdownload:
    /usr/local/apache/htdocs/goldenPath/$db/file
(in the path, "htdocs-hgdownload" should become "htdocs") 

Finally, check to see if the downloads files ought to have a link from downloads.html. If so, add the link and push downloads.html (after the files are already pushed!).

Make Public

Make your track public by using the "make public" command on hgwbeta while in the trackDb directory (src/hg/makeDb/trackDb):

   [user@hgwbeta trackDb]$ make public

Your track should now be visible on the hgwbeta-public server.

Also see ThreeStateTrackDb for more information.

Push Request

When the track is ready to be released, ask admins (push-request at soe) for a push of the tables (including trackDb_public and hgFindSpec_public, if needed) from mysqlbeta to mysqlrr. Push any associated downloads. Push any associated static docs. Notify (cc:) the track sponsor on the push request.

If the track already exists on the RR you may need to selectively push the tables/trackDb. Click here for more information.

If this is a repush of existing data that was found to be problematic, add a note to repush.html. The file to edit is in the genecats tree, at genecats/qa/repush.html. (This doesn't happen very often.)

Validate on the RR

Check your track on the RR. Check that searches work (if not, you probably need to push the hgFindSpec_public table). Also check that all default tracks still display. If you filled in the "Release Log URL" field in the push queue, check the next day to be sure that the link from the release log works as expected.